এই পাতাটি অনুবাদে সাহায্য করুন

🌏

আপনি এই পাতাটি ইংরেজিতে দেখছেন কারণ আমরা এখনও এটি অনুবাদ করি নি। আমাদেরকে এই বিষয়বস্তু অনুবাদে সাহায্য করুন।

This page is incomplete and we'd love your help. Edit this page and add anything that you think might be useful to others.

Block explorers

Last edit: , Invalid DateTime
Edit page

Block explorers are your portal to Ethereum's data. You can use them to see real-time data on blocks, transactions, miners, accounts, and other on-chain activity.

Prerequisites

You should understand the basic concepts of Ethereum so you can make sense of the data that a block explorer gives you. Start with an intro to Ethereum.

Services

  • EtherscanAlso available in Chinese, Korean, Russian, and Japanese
  • Etherchain
  • EthplorerAlso available in Chinese, Spanish, French, Turkish, Russian, Korean and Vietnamese
  • BlockchairAlso available in Spanish, French, Italian, Dutch, Portuguese, Russian, Chinese, and Farsi
  • Blockscout
  • OKLink

Data

Ethereum is transparent by design so everything is verifiable. Block explorers provide an interface for getting this information. And this is for both the main Ethereum network and the testnets, should you need that data.

Here's a summary of the types of data you can get from a block explorer.

Blocks

New blocks are added to Ethereum every ~12 seconds (this can fluctuate) so there's a near-constant stream of data that gets added to block explorers. Blocks contain a lot of important data that you may find useful:

Standard data

  • Block height – The block number and length of the blockchain (in blocks) on creation of the current block.
  • Timestamp – The time at which a miner mined the block.
  • Transactions – The number of transactions included within the block.
  • Miner – The address of the miner who mined the block.
  • Reward – The amount of ETH awarded to the miner for adding the block (standard 2ETH reward + any transaction fees of transactions included in the block).
  • Difficulty – The difficulty associated with mining the block.
  • Size – The size of the data within the block (measured in bytes).
  • Gas used – The total units of gas used by the transactions in the block.
  • Gas limit – The total gas limits set by the transactions in the block.
  • Extra data – Any extra data the miner has included in the block.

Advanced data

  • Hash – The cryptographic hash that represents the block header (the unique identifier of the block).
  • Parent hash – The hash of the block that came before the current block.
  • Sha3Uncles – The combined hash of all uncles for a given parent.
  • StateRoot – The root hash of Merkle trie which stores the entire state of the system.
  • Nonce – A value used to demonstrate proof-of-work for a block by the miner.

Uncle blocks

Uncle blocks are created when two miners create blocks at near-enough the same time – only one block can be validated across the nodes. They are not included but still receive a reward for the work.

Block explorers provide information about uncle blocks like:

  • An uncle block number.
  • A time they occurred.
  • The block height at which they were created.
  • Who mined it.
  • The ETH reward.

Gas

Not only will block explorers give you data about Gas usage in transactions and blocks, but some will give you information on the network's current gas prices. This will help you understand network usage, submit safe transactions and not overspend on gas. Look out for APIs that can help you get this information into your product's interface. Gas-specific data covers:

  • Estimated units of gas needed for a safe but slow transaction (+ estimated price and duration).
  • Estimated units of gas needed for an average transaction (+ estimated price and duration).
  • Estimated units of gas needed for a fast transaction (+ estimated price and duration).
  • Average confirmation time based on gas price.
  • Contracts that are consuming gas – in other words, popular products that are seeing lots of usage on the network.
  • Accounts that are spending gas – in other words, frequent network users.

Transactions

Block explorers have become a common place for people to track the progress of their transactions. That's because the level of detail you can get provides extra certainty. Transaction data includes:

Standard data

  • Transaction hash – A hash generated when the transaction is submitted.
  • Status – An indication of whether the transaction is pending, failed or a success.
  • Block – The block in which the transaction has been included.
  • Timestamp – The time at which a miner mined the transaction.
  • From – The address of the account that submitted the transaction.
  • To – The address of the recipient or smart contract that the transaction interacts with.
  • Tokens transferred – A list of tokens that were transferred as part of the transaction.
  • Value – The total ETH value being transferred.
  • Transaction fee – The amount paid to the miner to process the transaction (calculated by gas price*gas used).

Advanced data

  • Gas limit – The maximum numbers of gas units this transaction can consume.
  • Gas used – The actual amount of gas units the transaction consumed.
  • Gas price – The price set per gas unit.
  • Nonce – The transaction number for the from address (bear in mind this starts at 0 so a nonce of 100 would actually be the 101st transaction submitted by this account.
  • Input data – Any extra information required by the transaction.

Accounts

There's a lot of data that you can access about an account. This is why it's often recommended to use multiple accounts so that your assets and value can't be easily tracked. There are also some solutions being developed to make transactions and account activity more private. But here's the data that's available for accounts:

User accounts

  • Account address – The public address you can use to send funds to.
  • ETH balance – The amount of ETH associated with that account.
  • Total ETH value – The value of the ETH.
  • Tokens – The tokens associated with the account and their value.
  • Transaction history – A list of all the transactions where this account was either the sender or the recipient.

Smart contracts

Smart contract accounts have all the data that a user account will have, but some block explorers will even display some code information too. Examples include:

  • Contract creator – The address that deployed the contract to Mainnet.
  • Creation transaction – The transaction that included the deployment to Mainnet.
  • Source code – The solidity or vyper code of the smart contract.
  • Contract ABI – The Application Binary Interface of the contract – the calls the contract makes and the data received.
  • Contract creation code – The compiled bytecode of the smart contract – created when you compile a smart contract written in Solidity or Vyper, etc.
  • Contract events – A history of the methods called in the smart contract. Basically a way to see how the contract is being used and how often.

Tokens

Tokens are a type of contract so they'll have similar data to a smart contract. But because they have value and can be traded they have additional data points:

  • Type – Whether they're an ERC-20, ERC-721 or another token standard.
  • Price – If they're an ERC-20 they'll have a current market value.
  • Market cap – If they're an ERC-20 they'll have a market cap (calculated by price*total supply).
  • Total supply – The number of tokens in circulation.
  • Holders – The number of addresses that hold the token.
  • Transfers – The number of times the token has been transferred between accounts.
  • Transaction history – A history of all the transactions including the token.
  • Contract address – The address of the token that was deployed to Mainnet.
  • Decimals – ERC-20 tokens are divisible and have decimal places.

Network

Of course there's some data that speaks to the health of the network. These are quite specific to Ethereum's proof-of-work consensus mechanism. When Ethereum transitions to Eth2 some of this data will be redundant

  • Difficulty – The current mining difficulty.
  • Hash rate – An estimate of how many hashes are being generated by Ethereum miners trying to solve the current Ethereum block or any given block.
  • Total transactions – The number of transactions since Ethereum was created.
  • Transactions per second – The number of transactions processable within a second.
  • ETH price – The current valuations of 1 ETH.
  • Total ETH supply – Number of ETH in circulation – remember new ETH is created with the creation of every block in the form of block rewards.
  • Market cap – Calculation of price*supply.

Eth2 data

The Eth2 upgrades are still in development but it's worth talking about some of the data points that explorers will be able to provide you. In fact, all of this data is available right now for the testnets.

If you're not familiar with Eth2 check out our overview of the Eth2 upgrades.

Epoch

The first Eth2 upgrade, the beacon chain, will create committees of validators which are randomised at the end of every epoch (every 6.4 minutes) for security reasons. Epoch data includes:

  • Epoch number.
  • Finalized status – Whether the epoch has been finalised (Yes/No).
  • Time – The time the epoch ended.
  • Attestations – The number of attestations in the epoch (votes for blocks within slots).
  • Deposits – The number of ETH deposits included in the epoch (validators must stake ETH to become validators).
  • Slashings – Number of penalties given to proposers of blocks or attestors.
  • Voting participation – The amount of staked ETH used to attest blocks.
  • Validators – Number of validators active for the epoch.
  • Average Validator balance – Average balance for active validators.
  • Slots – Number of slots included in the epoch (slots include one valid block).

Slot

Slots are opportunities for block creation, the data available for each slot includes:

  • Epoch – The epoch in which the slot is valid.
  • Slot number.
  • Status – The status of the slot (Proposed/Missed).
  • Time – The slot timestamp.
  • Proposer – The validator that proposed the block for the slot.
  • Block root – The hash-tree-root of the BeaconBlock.
  • Parent root – The hash of the block that came before.
  • State root – The hash-tree-root of the BeaconState.
  • Signature.
  • Randao reveal.
  • Graffiti – A block proposer can include 32 byte long message to its block proposal.
  • ETH1data.
    • Block hash.
    • Deposit count.
    • Deposit root.
  • Attestations – Number of attestations for the block in this slot.
  • Deposits – The number of deposits during this slot.
  • Voluntary exits – The number of validators that left during the slot.
  • Slashings – Number of penalties given to proposers of blocks or attestors.
  • Votes – The validators that voted for the block in this slot.

Blocks

In Eth2 blocks work differently because miners are replaced by validators and the beacon chain introduces slots and epochs to Ethereum. So that means new data!

  • Proposer – The validator that was algorithmically chosen to propose the new block.
  • Epoch – The epoch in which the block was proposed.
  • Slot – The slot in which the block was proposed.
  • Attestations – The number of attestation included in the slot. Attestations are like votes that indicate the block is ready to go to the beacon chain.

Validators

Validators are responsible for proposing blocks and attesting to them within slots.

  • Validator number – Unique number that represents the validator.
  • Current balance – The validator's balance including rewards.
  • Effective balance – The validator's balance that is used for staking.
  • Income – The rewards or penalties received by the validator.
  • Status – Whether the validator is currently online and active or not.
  • Attestation effectiveness – The average time it takes for the validator's attestations to be included in the chain.
  • Eligibility for activation – Date (and epoch) when the validator became available to validate.
  • Active since – Date (and epoch) when the validator became active.
  • Proposed blocks – The block that the validator has proposed.
  • Attestations – The attestations that the validator has provided.
  • Deposits – The from address, transaction hash, block number, timestamp, amount and status of the staking deposit made by the validator.

Attestations

Attestations are "yes" votes to include blocks in the chain. Their data relates to a record of the attestation and the validators who attested

  • Slot – The slot in which the attestation took place.
  • Committee index – The index of the committee at the given slot.
  • Aggregation bits – Represents the aggregated attestation of all participating validators in the attestation.
  • Validators – The validators that provided attestations.
  • Beacon block root – Points to the block to which validators are attesting.
  • Source – Points to the latest justified epoch.
  • Target – Points to the latest epoch boundary.
  • Signature.

Network

The Eth2 top-level data includes the following:

  • Current epoch.
  • Current slot.
  • Active validators – Number of active validators.
  • Pending validators – Number of validators waiting for to be made active.
  • Staked ETH – Amount of ETH staked in the network.
  • Average balance – Average ETH balance of validators.

Block explorers

  • Etherscan – a block explorer you can use to fetch data for Ethereum Mainnet, Ropsten Testnet, Kovan Testnet, Rinkeby Testnet, and Goerli Testnet.
  • Blockscout – focusses on the following networks:
    • xDai – a clever combination of MakerDAO's DAI stablecoin and POA's sidechain and tokenbridge technology.
    • POA – A sidechain and autonomous network secured by a group of trusted validators. All validators on the network are United States notaries, and their information is publicly available.
    • POA Sokol Testnet.
    • ARTIS – an Ethereum compliant blockchain.
    • LUKSO L14 – L14 functions as the first test-network, to allow the LUKSO community to build and test on a common infrastructure.
    • qDai.
  • Etherchain – a block explorer for the Ethereum Mainnet.
  • Ethplorer – a block explorer with a focus on tokens for the Ethereum Mainnet and the Kovan testnet.
  • Blockchair - the most private Ethereum explorer. Also for sorting and filtering (mempool) data.

Eth2 block explorers

Further reading

Know of a community resource that helped you? Edit this page and add it!